Mobile technicians and repair shops
Partners who already handle RV furnace work and can document fit, connections, startup and service access.
PARTNER PILOT
A 50-unit first run for selected RV businesses and installation partners.
FIRST BATCH · 50 UNITS
Applications open
FOGATTI RFS20A0B · 20K COMPACT FURNACE PILOT
Put a compact 20K furnace to work in a real small-RV install.
Fogatti is inviting selected RV businesses to test RFS20A0B—a complete, front-intake, direct-discharge propane furnace—through installation and initial use. The first batch is limited to 50 units and requires a fit review before access is confirmed.
- MAX. HEAT INPUT
- 20,000 BTU
- FUEL
- Propane
- ELECTRICAL
- 12V DC · 2.9 A
- SCREENING RANGE
- 16–22 ft RVs*
*Starting guidance for small travel trailers and small Class C RVs. Climate, insulation, floor plan and actual heat demand affect furnace sizing.
Pilot ordering opens after Fogatti confirms your business profile, measured fit and installation readiness.
Received our email? Use the same business email when applying or checking out so the Fogatti team can match your invitation.
Limited first run
Fit review before access
Structured follow-up
A complete direct-discharge furnace built around compact RV layouts.
RFS20A0B combines a front-intake layout, direct warm-air delivery, sealed combustion, electronic ignition and a soft-start sequence in one compact propane furnace.
- MODEL
- RFS20A0B
- CONFIGURATION
- Complete furnace · Front intake
- AIR DELIVERY
- Direct discharge · 133 CFM
- ELECTRICAL
- 12V DC · 2.9 A
- BLOWER
- 35 W
- DIMENSIONS
- 11.3 × 10.4 × 23.1 in
- NET WEIGHT
- 25.7 lb
- THERMOSTAT RANGE
- 50–90°F / 10–32°C
- GAS INLET
- 3/8 in Male Flare
- COMBUSTION & IGNITION
- Sealed combustion · Electronic ignition · Soft-start sequence
Bring us an installation the product team can learn from.
This first run is for working RV partners who can measure a real project, document the installation and explain what future installers need to know.
Dealers and conversion builders
Teams working across multiple RV layouts who can judge where a compact format solves a real installation constraint.
Rental fleets and small manufacturers
Operators who can evaluate serviceability, repeatable installation and performance across a defined vehicle group.
Installation-capable creators
Creators who can show the complete install and test process, including constraints and issues—not only an unboxing.
RV length starts the conversation. Measurements decide the install.
The product guide positions this model for approximately 16–22 ft small travel trailers and small Class C RVs. Treat that as a screening guide: climate, insulation, floor plan and heat demand affect sizing, while the cabinet, exterior-wall depth, propane routing, 12V wiring and service access determine installation fit.
Measure the cabinet and service access
Record usable width, height and depth plus the room needed to place, secure and service the furnace.
Check the front-intake installation location
Record the front-grille clearance and confirm the product face can remain unobstructed in the selected cabinet.
Measure the exterior-wall X dimension
Record the actual X dimension, compare it with the five training-reference ranges and submit it for final component review.
Review propane and 12V DC routing
Document the proposed propane connection and 12V source, then verify electrical and gas requirements against the approved installation instructions.
Record the existing furnace and controls
Photograph the old data plate, note the brand, model and control arrangement, and include them in the fit review.
EXTERIOR-WALL FIT
Match the vent reference to the measured X dimension.
The three diagrams below show the 60, 145 and 175 mm versions supplied for fit screening on this page. The training reference includes five possible lengths; measure first, then have Fogatti confirm the correct component and final configuration.
Five training-reference tube lengths
Installation dimensional reference only. Fogatti must confirm the correct component, current availability and final configuration; this table does not state what is stocked or included.
| Reference | Tube length | X dimension |
|---|---|---|
| SP045A0S | 2-3/8 in (60 mm) | 22-1/4–23-3/8 in |
| SP046A0S | 3-5/16 in (85 mm) | 23-1/4–24-7/16 in |
| SP047A0S | 4-1/2 in (115 mm) | 24-7/16–25-1/2 in |
| SP048A0S | 5-3/4 in (145 mm) | 25-1/2–26-3/4 in |
| SP049A0S | 6-7/8 in (175 mm) | 26-3/4–27-7/8 in |
60 mm tube option
X dimension: 22-1/4 in to 23-3/8 in
145 mm tube option
X dimension: 25-1/2 in to 26-3/4 in
175 mm tube option
X dimension: 26-3/4 in to 27-7/8 in
Measure it. Install it. Report what the next partner needs to know.
The pilot follows the complete job—from RV and cabinet measurements through installation, startup and initial use—so the result is practical, not promotional.
-
01
PROFILE
Submit the installation profile
Share the business type, RV layout, install location and existing furnace, if any.
-
02
FIT REVIEW
Confirm the job before a unit is assigned
Fogatti reviews the cabinet, wall-depth, propane, 12V and installation context before approving pilot access.
-
03
INSTALL & TEST
Document the complete installation
Capture the before-and-after condition, required parts, installation time, startup and initial heating test.
-
04
FOLLOW-UP
Share the practical result
Report what fit, what did not, what the user noticed and what the product or instructions should improve.
WHAT WE WILL ASK FOR
Useful detail beats polished praise.
Clear measurements, notes and before-and-after photos help the product team act. Exact instruments are welcome, but practical observations matter too.
-
RV and installation context
RV type and length, furnace location, cabinet measurements and the intended use case.
-
Old furnace details
Brand, model, data-plate photo and why the original unit is being replaced.
-
Installation time and added parts
Who installed it, the hardest step and any extra sealant, wire, fitting, fastener or adapter required.
-
Heating observation
Starting indoor and outdoor temperature, target temperature and time to reach it.
-
Airflow coverage
How the main living area feels, whether hot or cold spots remain and whether extra air circulation is needed.
-
Sound, power and photos
Startup and running sound, any vibration, the 12V operating context, and clear before-and-after photos.
APPLY FOR THE FIRST RUN
Show us the installation you want to test.
Use the same business email that received Fogatti's invitation so we can match your profile. Qualified RV businesses arriving from ads may also apply when they have a suitable project and can complete the follow-up.
Submitting the form does not reserve a unit.
The 50-unit first run is assigned after Fogatti reviews business relevance, measured fit and installation readiness.
- A specific small travel trailer or small Class C project
- Qualified propane and 12V installation capability
- Measurements, installation documentation and practical follow-up
Know the product and the pilot before you apply.
These answers cover the pilot process. Final installation decisions must follow the approved product instructions and the actual RV.
Is RFS20A0B a complete furnace or a replacement core?
RFS20A0B is a complete 20K front-intake, direct-discharge propane furnace. It is not a ducted furnace or a replacement core, and compatibility with an existing installation should not be assumed.
What RVs is the 20K model intended for?
The product guide uses approximately 16–22 ft small travel trailers and small Class C RVs as a starting range. Climate, insulation, floor plan and expected use still determine the appropriate furnace size.
Who qualifies for the pilot?
RV businesses and installation-capable partners with a relevant compact-RV installation, qualified propane and 12V capability, and the ability to document the job and follow-up experience.
Does submitting the form guarantee a pilot unit?
No. The first run is limited. Fogatti will review installation fit, business relevance and testing readiness before confirming access.
How do I know whether the 20K furnace fits?
The unit measures 11.3 × 10.4 × 23.1 in, but product dimensions alone do not confirm fit. Measure the cabinet, exterior-wall X dimension, front-grille clearance and service access, then verify the propane and 12V connections against the approved installation instructions.
Can a customer install the furnace without a technician?
The work involves propane, 12V electrical connections and exterior combustion-air intake and exhaust. Fogatti recommends qualified professional installation and following every verification step in the approved installation instructions before operation.
What feedback will Fogatti request?
Expect questions about the RV and old furnace, cabinet and vent fit, installation time and extra parts, temperature change, airflow coverage, sound, electrical context and before-and-after photos.
When are price, availability and shipping confirmed?
Approved invitees will see the active Shopify price and availability when pilot ordering is open. Applicants will receive program and shipping details from Fogatti after their installation profile is reviewed.
READY TO TEST A REAL INSTALL?
Bring us the measurements. We'll help screen the fit.
Claim a unit if your invitation and fit review are approved, or send us the installation profile to start the review.
RFS20A0B · 20K Pilot
FIRST BATCH · 50 UNITS