Use gas, electric or both
Switch among LP gas, 120V electric and combined heating according to the available RV utilities.













DUAL-FUEL RV WATER HEATER
Fast local shippingFree delivery from a U.S. warehouse
30-day returnsSee the return policy for conditions
12-month warrantyHassle-free product warranty
HybridShower 6 Pro combines a 12,000 BTU LP burner, a 1,440W electric element and 6 gallons of stored hot water.
Switch among LP gas, 120V electric and combined heating according to the available RV utilities.
The controller provides three specified temperature settings for different hot-water routines.
The Pro model uses a powered titanium rod and the existing template states up to 12 hours of retained tank warmth.
The 6-gallon capacity and fit remain the first checks; the powered titanium rod is the meaningful Pro difference.
Confirm the 13 × 13 in clear opening and select the exterior door coverage required by the old installation.
The unit supports LP gas, 120V electric or combined heating.
The Pro tank replaces the standard magnesium rod with a powered titanium design.
Choose the gallon platform with its matching wall opening, exterior coverage and connections.
Compare every dimension and utility connection with the old heater and the product manual.
This model pairs a 13 × 13 in clear opening with 15 × 15 in or 15 × 18 in exterior-door coverage.
Six- and ten-gallon models use different openings, while Pro adds the powered titanium-anode design.
For owners comfortable with routine magnesium-anode service.
For owners who prefer a powered titanium anode rod.
For owners comfortable with routine magnesium-anode service.
For owners who prefer a powered titanium anode rod.
These answers use the specifications and installation guidance already present in the original product template.
The existing template specifies a minimum 13 × 13 in clear opening and 15 × 15 in and 15 × 18 in door options. Measure the opening and exterior coverage before ordering.
The standard model uses a magnesium anode rod. The Pro model uses a powered titanium rod that does not require the same routine rod replacement.
Yes. Electric heating uses 120V AC. The LP-gas heating controls use 12V DC, so confirm both supplies against the installation manual.
Confirm the wall opening, exterior door coverage, gas connector and water connections before removing the existing heater.
The existing product guidance allows an extension using 24 AWG shielded wire. Follow the product manual for the final installation.
This product is rated 5.0 of 5.0 stars.
It has received 20 reviews.